The rate bands for each service
Recurring janitorial and office cleaning in Fresno usually lands between $0.14 and $0.22 per square foot monthly when the crew comes five nights a week. A small suite with one restroom and little traffic starts near $0.09, while a building packed with visitors, kitchens and long task lists climbs toward $0.39. All figures on this page are 2026 bands drawn from published market data.
Porter coverage is sold by the hour instead of by the foot. A Fresno porter-hour typically runs $32 to $40, with light routes starting around $28 and demanding posts reaching $49. Carpet extraction is priced per square foot each time it is done, usually $0.19 to $0.38, inside a wider span of $0.11 to $0.60.
Hard-floor refinishing through strip and wax typically costs $0.42 to $1.00 a square foot, with a minimum charge for small jobs and a full span from $0.33 to $2.00. Warehouse and plant floor area on a recurring plan runs lighter, commonly $0.08 to $0.19 per square foot a month, from $0.06 at the simple end to $0.33 at the heavy end. Post-construction cleanup is a one-time charge covering every stage, usually $0.28 to $0.60 per square foot, from $0.21 to $0.95.
Specialty services are priced from the rooms involved: exam rooms and your protocol for medical offices, the interval for restroom deep cleaning, the touchpoint count for disinfection, locker rooms and hours for gyms, classrooms and break-week work for schools, and stations and handoffs for shared kitchens.
Concrete scrubbing has no single going rate, because coating, soil and floor condition change the job so much from one shed to the next. It is priced per square foot after a walkthrough.
Turning a price per square foot into your estimate
A per-square-foot price becomes a budget once it meets your building. Multiply the cleanable square footage, meaning the rooms the crew actually works in, by the rate for your building type and visit schedule, and you have a monthly estimate to plan around.
Five things set where a building lands in the band. Building type comes first, since a dental suite takes more minutes per foot than an open office or a warehouse aisle. Frequency is next: five nights a week sits at the base rate, and lighter schedules cost less each month but more per visit. Square footage works in your favor on larger floors, where set-up time spreads across more space. Floors and restrooms round it out, because carpet, tile and concrete each need their own equipment and every restroom adds crew time to each visit.
For a quick figure, enter those details in our Fresno cleaning price calculator. The walkthrough then sets the price for commercial cleaning in Fresno on your exact rooms.
Three buildings, priced out
First, a 2,800-square-foot professional office in Clovis with one kitchenette and two restrooms. Cleaned five evenings a week at $0.15 a square foot, it comes to $420 a month as of 2026. Restocking paper goods and soap, ours or the office’s own, stays inside that visit.
Second, a 20,000-square-foot Fresno distribution building. The warehouse floor and its support rooms on a recurring plan at $0.10 a square foot cost $2,000 a month. Add a porter for 20 hours a week at $36 an hour to keep the breakroom and crew restrooms in order between shifts, and that line adds about $3,120 a month (roughly 87 porter-hours), bringing the building to about $5,120 a month.
Third, a 6,000-square-foot tenant buildout in Selma that needs rough, final and touch-up cleaning before opening day. At $0.40 a square foot across all stages, the one-time cleanup totals $2,400. If the new lobby gets a 1,200-square-foot strip and wax at $0.60 before move-in, that floor adds $720.
What moves a Fresno number up or down
Square footage and nights per week do most of the work in any estimate. After that, count the restrooms and breakrooms, because those rooms take the most crew time on every visit. The mix of floors matters next: carpet, sealed tile and bare concrete each call for different equipment and minutes per room.
Valley conditions add their own pressure. Dust from gravel lots, field soil on boots and grit from loading areas all get tracked into entries and corridors, so buildings near farms and yards take more floor time than a downtown suite. Operations that see more visits during harvest pay more for those months and less once the season closes, a pattern covered in our guide to farm and greenhouse cleaning.
Access shapes the bill as well. Evening and weekend windows, alarm procedures, shift changes at a plant and work under a food facility’s written procedures all set how long a crew spends on site. When we supply consumables, they sit on their own line, apart from the cleaning rate.
How Fresno compares with its neighbors
Each town has its own band. Clovis offices on a five-night plan typically pay $0.14 to $0.22 a square foot each month, from about $0.10 to $0.40, and Clovis porters bill about $32 to $41 an hour. Madera, Sanger and Selma run $0.15 to $0.23, with simple spaces near $0.10 and busy ones up to $0.41, and a porter-hour there usually costs $33 to $42.
Travel time and the mix of buildings in each town explain most of the gap, so a Sanger shop and a Fresno office of the same size can land a cent or two apart per foot.
Lining up quotes side by side
Two quotes only compare fairly when they price the same work, and that holds whether you are hiring for the first time or moving from your current provider. Before you look at totals, check that each one lists the same rooms, the same nights, the same floor intervals and the same answer on who buys the consumables.
We walk every building in person before pricing it, and that visit is what turns these bands into your number. Bring your room list, hours and any facility rules, and see how routine visits pair with periodic work in our guide to floor refinishing and carpet extraction. Then compare the result against recurring janitorial service for Fresno buildings on equal terms.
A few useful answers
Quick answers
What is the average commercial cleaning cost per square foot in Fresno?
For recurring janitorial and office cleaning five nights a week, Fresno rates typically fall between $0.14 and $0.22 per square foot each month, based on 2026 published market data. Warehouse floor area runs lighter, and strip and wax is priced per job.
Why can a Madera or Selma quote differ from one in Fresno?
Mostly travel time and the mix of buildings. Bands in the smaller towns start about a cent per square foot above Fresno’s.
Is strip and wax part of the monthly janitorial rate?
Refinishing is priced on its own line per square foot and booked on its own interval. The monthly rate covers the routine visits.
How does harvest season change a cleaning budget?
Worker restrooms and break areas at packing and farm operations get extra visits during the busy weeks, which raises those months. The total steps back down when the season ends.
What makes two buildings of the same size cost different amounts?
Restroom count, floor type, traffic and access hours. A clinic and a records office with equal square footage rarely end up with the same rate.
Resources
Related guides
Services

