Skip to content
Office copy room with a shared copier, counter and door handles, the touchpoints disinfection and sanitizing covers

Services

Disinfection and Sanitizing in Fresno, CA

Our commercial disinfecting services cover the surfaces Fresno workplaces share most. Touchpoints, restrooms, break rooms, shared equipment and entries are cleaned first, then treated, on a routine schedule or on request.

Request a quoteCall (559) 553-1864

Cost calculator

Estimate your cost

The surfaces everyone touches

In any Fresno building, a short list of surfaces passes through many hands a day: door handles and push plates, elevator buttons, light switches, faucet handles, railings, counters, and the phones and keyboards at shared desks. Those touchpoints are where disinfecting pays off most.

Our disinfection and sanitizing service focuses there. It runs as part of recurring janitorial visits, on a daytime route or as a stand-alone treatment when you want a building-wide reset. It suits offices, clinics, schools, gyms, plant break rooms and public service counters across Fresno, Clovis, Madera, Sanger and Selma.

Clean first, then disinfect

Disinfectant works on clean surfaces. Dust, grease and residue shield whatever lies underneath, so every treatment starts with cleaning that lifts the soil. Only then is the disinfectant applied, and it stays wet for the full contact time on its label before it is wiped or left to dry.

Sanitizing is the lighter step, used on food-contact surfaces in break rooms and on items like toys and shared tools where your plan calls for it. Disinfecting is reserved for restroom fixtures and high-touch hard surfaces. Matching the step to the surface keeps the treatment working and the materials in good condition. Each product is used the way its label directs, including dilution and the surfaces it is meant for, so finishes, screens and fabrics are protected.

Restrooms, break rooms and entries

Restrooms get the full sequence on every visit: fixtures, flush handles, partitions, sinks, dispensers and door hardware are cleaned and disinfected, and floors are finished last. Break rooms get counters, tables, microwave and refrigerator handles, coffee stations and sink areas cleaned and sanitized.

Entry areas bring the outside in. Door glass, push bars, reception counters, visitor sign-in stations and elevator panels are cleaned and disinfected, so the first surfaces people touch are among the cleanest in the building.

Shared equipment, gyms and public counters

Hot desks, conference phones, shared keyboards, copier panels, time clocks and fitness equipment change hands all day. They are cleaned with products suited to electronics and finishes, then treated on the schedule you set, whether nightly, between shifts or a few times a week.

At Valley plants and warehouses, the crew rooms, time clocks and locker areas next to the production floor get the same attention, timed to shift changes so each crew starts on clean surfaces. Fitness studios and gyms carry mats, benches, handles and machine grips in constant contact. They are cleaned and disinfected after closing with products that suit vinyl, rubber and metal, and locker rooms and showers get the full restroom sequence.

Public service counters, bank lobbies, waiting rooms and ticket windows pass pens, counter tops, kiosk screens and card readers between strangers all day. Those surfaces get a nightly treatment, with a daytime pass added where the line rarely stops. Electronics are wiped with a dampened cloth rather than sprayed directly.

What cleaning, sanitizing and disinfecting mean

The three words get swapped freely, but the CDC keeps them apart. Cleaning lifts soil, grime and film off a surface. Sanitizing lowers the germs left on a surface to a level public health standards treat as safe. Disinfecting uses an EPA-registered product to kill germs on hard surfaces, and it works only when the surface stays wet for the contact time on the label.

Every product’s label says whether it sanitizes or disinfects, and the crew uses each one only for the step its label names.

Routine schedules and on-request treatments

Disinfection fits easily into regular janitorial services, so touchpoints are treated on every visit. Busy lobbies and restrooms can add a daytime touchpoint route through day porter service.

On-request treatments cover the moments when a full reset makes sense: before a building reopens after a holiday closure, after a large event, ahead of a move-in or once a renovation wraps up. A treatment can cover a single suite or the whole building, scheduled for evenings or weekends.

Settings with their own protocols

Medical and dental practices run their own infection-prevention plans, and medical office cleaning follows them room by room, including terminal cleaning of exam and procedure rooms when you schedule it. Schools and childcare centers set the products used around children, and school and daycare cleaning works from that list.

Food plants and packing operations run written sanitation programs for production areas. Disinfection there covers offices, break rooms, restrooms and locker rooms, while production sanitation stays under the facility’s written procedures through food manufacturing cleaning.

What sets the cost of disinfection

Price follows the number of rooms and touchpoints treated, how often treatment happens, whether it rides along with routine visits or stands alone, and when it is scheduled. A building-wide weekend treatment is priced on its own, while nightly touchpoint disinfection adds a little time to each janitorial visit. Pairing the two is efficient, because the cleaning step is already part of the visit.

A walkthrough maps the surfaces that matter most in your building, so treatment goes where people actually reach.

A few useful answers

Common questions

How is sanitizing different from disinfecting?

Sanitizing is the lighter treatment for food-contact counters and items like toys. Disinfecting is the stronger treatment for restroom fixtures and high-touch hard surfaces. Both come after cleaning.

Why do surfaces get cleaned before disinfecting?

Soil and residue shield the surface from the disinfectant. Cleaning first lets the product reach the surface and work for its full contact time.

Can disinfection be added to our nightly service?

Yes. Touchpoint disinfection can run on every janitorial visit, or only on the nights you choose.

Can you do a one-time disinfection of our building?

Yes. Building-wide or single-suite treatments are scheduled for evenings or weekends, before a reopening, an event or a move-in.

Which surfaces get the most attention?

Door handles, push plates, light switches, elevator buttons, faucets, counters, shared phones and keyboards, time clocks and break room handles.

What do commercial disinfecting services include?

Cleaning, then disinfecting, the hard surfaces people touch most: door hardware, restroom fixtures, break room handles, shared equipment and entry counters, with EPA-registered products left wet for their label contact time.